Changing the Faceplate on Your Ring Doorbell – A Simple Guide

Hey there! Today, I’m going to show you how to give your Ring Doorbell a fresh new look by changing its faceplate. It’s easy, I promise. So let’s dive right in!

First things first, gather your materials. You’ll need a small screwdriver, the new faceplate you want to install, and of course, your trusty Ring Doorbell.

Now, take a look at your Ring Doorbell. You’ll notice two small screws at the bottom of the device. These are holding the current faceplate securely in place. Grab your screwdriver and gently loosen and remove these screws.

Once the screws are out, carefully detach the old faceplate from your Ring Doorbell. Take a moment to admire its design before saying your goodbyes. Now it’s time to introduce your doorbell to its stylish new companion!

Take the new faceplate and align it with the front of your Ring Doorbell. Ensure that each of the holes lines up perfectly with the screw holes on the device. Once everything is lined up, it’s time to bring those screws back into the picture.

Grab the screws you removed earlier and insert them back into their respective holes. Begin tightening them, but make sure not to overtighten – we want to keep everything snug and secure without causing any damage.

And that’s it! You’ve successfully changed the faceplate on your Ring Doorbell. Stand back for a moment and admire the transformation – it’s like giving your doorbell a whole new identity!

If you ever want to change the faceplate again in the future, just remember these steps. It’s a quick and easy way to spruce up your doorbell and add a personal touch to your home’s entrance.

I hope this guide was helpful for you. If you have any questions or need further assistance, feel free to reach out. Happy faceplate swapping!

Hey there! Let’s talk about the Ring Doorbell, a fancy device that brings high-tech innovation to the world of doorbells. It’s pretty compact, but it can do way more than just ring. With the Ring app, you can actually chat with whoever shows up at your door. Plus, it’s got a camera that gives you a live video feed and a motion sensor that alerts you when someone’s hanging around.

But here’s the catch: every now and then, you’ll need to remove the faceplate for the Ring Doorbell to work properly.

Why take it off?

Wait a minute, you might ask. Why on earth would I want to remove the faceplate? I’ll tell you why. Every Ring Doorbell comes with an extra black cover. So, if you’re feelin’ that black cover vibe more than the metallic one, you’re gonna need to know how to take it off.

Here’s another important thing to know: this device runs on batteries. They last about 6 to 12 months, but eventually, you’ll need to recharge ’em. Problem is, you can’t get to the battery from the outside. So, yup, you guessed it, you’ll have to remove the faceplate to take it out and give it a recharge.

Takin’ off the faceplate

Good news is, removing the faceplate is pretty simple and doesn’t require any fancy tools. The ones you need come right in the product packaging.

1. Take out the security screw

When your Ring Doorbell arrived, you probably noticed a funny-looking star-shaped screwdriver in the box. If you’re wonderin’ what it’s for, just take a look at the security screw on the device. Yup, it’s the same shape. To remove the faceplate, you’ll need to take out that security screw. Just stick the tip of the screwdriver in, turn it counterclockwise, and at some point, the screw will come loose.

If you lost the screwdriver, don’t worry. You can order a replacement from the Ring website or find it on Amazon. Whatever you do, don’t try any other random tools to get that screw out. You might end up damaging it so bad that not even the star-shaped screwdriver can save the day. And hey, be careful not to lose the screw!

2. Push up from the bottom of the cover

Once the screw is out, you can remove the faceplate without using any other tools. But here’s the thing: they designed it to be a bit tricky, and for a good reason. They don’t want any old burglar messing around with your device.

Okay, so put your thumbs on the bottom of the faceplate and use your middle and index fingertips to provide some support from the front. Push up with your thumbs until you hear a little snap. It might take some effort, but trust me, the Ring Doorbell can handle it! If you’re havin’ trouble, you can use a butter knife or something flat and thin to help. Just don’t use anything sharp, ’cause you might damage the cover.

3. Pull the faceplate away

While your index and middle fingers keep the faceplate from falling, use your other hand to gently grab the cover and take it off. Be real careful not to drop anything. Once the faceplate is loose, it should come off smoothly. Take it slow, especially if it’s your first time doin’ this.

Putting the faceplate back on

Now that you’ve removed the faceplate, whether it’s to put on a new one or recharge the battery, it’s time to put it back. But listen up, this is a different process from removing it.

1. Line it up and snap it back on

Grab the faceplate you wanna put back, and find the plastic hook on the inside of the cover, up near the top. Hold the faceplate at about a 45-degree angle and put the hook into the hole. Now, snap the cover’s bottom in place.

2. Replace the security screw

Gather up the security screw you took out earlier and put it into the matching hole on the bottom side of the faceplate. Got it? Good. Now, use that star-shaped screwdriver to twist it back in, turnin’ it clockwise. Just make sure it’s nice and secure, but don’t go crazy, ’cause the cover might crack under too much pressure. Keep it tight, but not too tight, alright?

If you lose the security screw, don’t sweat it. Order a replacement online from Amazon or Ring’s official website.

How to Remove the Battery

If you need to recharge the battery on your Ring Doorbell, don’t worry – it’s easy to do. Here’s what you need to know:

Step 1: Take it Out

Once you’ve taken off the faceplate, you’ll see the battery inside the Ring Doorbell. Look for a black tab at the top of the battery. Press it with your index finger and use your thumb and middle finger to slide it out from the bottom. Release the tab and remove the battery.

Step 2: Charge it Up

Use the USB cable provided to recharge the battery. It might take a few hours to fully charge, so be patient and make sure it reaches 100%.

Step 3: Put it Back In

Once the battery is fully charged, slide it back into place until you hear the black tab snap. Before putting the faceplate back on, test the Ring Doorbell to ensure that the battery was properly charged and inserted. Then, refer to the instructions above to reattach the faceplate.

How to Change the Faceplate

Removing or replacing the faceplate on your Ring Doorbell is easier than it sounds. Just be careful when taking it off and make sure to keep the security screw safe so you don’t lose it.

Did you find these instructions helpful? Did you replace your cover with a different one or order a new one online? Share your experience in the comments below! Don’t hesitate to reach out.