Removing a Ring Doorbell without Tools: My Simple Method

Removing a Ring Doorbell without Tools: My Simple Method

You may have found yourself in a situation where you need to remove your Ring Doorbell, but don’t have any tools on hand. Don’t worry! I’ve got a simple method that doesn’t require any special equipment.

First, let’s talk about why you might need to remove your Ring Doorbell. Perhaps you’re moving houses and want to take it with you, or maybe you’re just looking to upgrade to a newer model. Whatever the reason, removing your Ring Doorbell without tools is definitely doable.

Here’s how I do it:

Step 1: Take a moment to familiarize yourself with your Ring Doorbell. Look for a small release button located on the bottom back of the device. This button is what we’ll be using to detach the doorbell.

Step 2: Gently press and hold the release button with your thumb or finger. Apply a little bit of pressure, but be careful not to push too hard. You don’t want to damage the device.

Step 3: While continuing to hold the release button down, carefully lift the Ring Doorbell upwards. You should feel some resistance, but with a little bit of patience and a gentle touch, it should eventually detach from its mounting bracket.

Step 4: Congratulations! You’ve successfully removed your Ring Doorbell without any tools. Now you can proceed with your desired plans, whether it’s moving or upgrading your security system.

Remember, if you encounter any difficulties or the doorbell doesn’t seem to come off easily, double-check that you’re pressing the release button correctly. It’s important not to force anything or use excessive pressure, as this could potentially cause damage.

So there you have it – a simple and tool-free method for removing your Ring Doorbell. I hope this guide has been helpful to you. Now you can confidently tackle this task without any stress. Happy removing!

The Ring Video Doorbell is an amazing product that brings your doorstep right to your smart device. It completely replaces your regular doorbell and transforms it into a speaker, camera, and video streaming device. The best part is, you can use the speaker and video streaming features even if you’re not at home. All you need is the dedicated smart app and an internet connection.

But there may come a time when you need to remove the Ring Video Doorbell. Maybe the battery needs to be recharged or replaced, as it can last between six to twelve months depending on how often the motion sensor is triggered. Or perhaps you simply want to move the device to a different location. Regardless of the reason, you want the process to be simple and straightforward.

Why would you ever remove it?

Well, let’s start by understanding how this device works and what powers it. You might think that it needs to be connected to a power source, but that’s not the case. The Ring Video Doorbell is actually powered by a battery. This battery can last for months, but eventually it will run out and you’ll need to remove the device to recharge or replace it.

Alternatively, you might want to move the Ring device to a different spot, even if it’s just a few inches away. It could be mounted too high or too low, or maybe you’re moving to a new home and want to take it with you. Whatever the reason, you want the process to be as easy as possible.

Removing it with a screwdriver

Now let’s talk about how to remove the Ring Video Doorbell. First, you need to remove the security screws. The product box should include a tool to help you with this. Once the screws are off, you can unmount the Ring device from the mounting bracket. You might need to apply some force since it was probably mounted tightly. Just be careful not to damage the bracket.

If the bracket is attached to vinyl or wood, all you have to do is remove the screws. It’s not difficult, but you’ll be left with some holes in the wall. On the other hand, if the bracket is attached to a concrete, brick, or stucco wall, you probably used plastic anchors. These anchors can be a bit tricky to remove. The best approach is to unscrew the screws and then use the screwdriver as a lever to force the anchors out.

Whether you use a screwdriver or other tools, removing the Ring doorbell can be a frustrating task. The instruction manual suggests using screws for installation, but that may not be the best option.

Removing it Without Tools

To remove the Ring Video Doorbell without any tools, let’s explore an alternative installation process. The initial setup is mostly the same – charge the 6,000 mAh battery, download the dedicated app, connect to Wi-Fi, and follow the prompts.

Instead of making screw marks and attaching the device with screws, you can use permanent outdoor mounting tape. Make sure to consider your wall type and buy tape accordingly.

While you can glue the Ring directly onto the wall without the mounting bracket, this may require repeating the wall-mounting process for each battery replacement. The mounting bracket provided offers convenience when temporary removal is needed.

The benefit of using the mounting tape instead of screws is the ease of removal. With tape, you can avoid drilling holes that damage the wall’s finish and structure.

Are There Any Downsides to Using Tape?

Honestly, there aren’t many. Some might worry that tape would make it easy for thieves to remove the device, but it’s not that simple. First, they wouldn’t expect it to be glued, assuming it’s screwed. Besides, the tape requires effort to remove. Additionally, the motion sensor will alert you to any activity with the camera-equipped Ring Video Doorbell.

How to Actually Remove It Without Tools

Even with tape, you should be cautious to protect both the device and your wall. It’s recommended to use the provided mounting bracket for easier access. Instead of just pulling the device by hand, which can cause damage, use a dull-edged lever and gently pull it towards you. This method ensures the device and wall remain undamaged.

No Tools, More Ease

The fewer tools needed, the easier your life becomes. With the Ring Video Doorbell, the screws don’t offer any significant advantages, so using tape is the best way to ensure effortless removal at any time.

Have you tried the permanent tape method? Do you prefer it over screws? Share your thoughts in the comments section. Feel free to suggest other ways to remove the Ring doorbell without tools.

How to Turn off Ring Doorbell Motion Recording

2 thoughts on “How to Remove Ring Doorbell Without Any Tools”

Sam Sullivan says:

I have a Ring doorbell installed in a difficult-to-reach spot. I need to remove it but can barely access the security screws. Any tips for getting to the screws and relocating it properly?

Denise Callahan says:

I have an original Ring doorbell and want to replace it with Ring Pro. Unfortunately, I misplaced the original screwdriver needed to remove the security screw. The Ring Pro screwdriver seems too large. What should I do?

Leave a Comment

Do not miss this experience!

Ask us any questions

Get in touch