Fixing the dns_probe_finished_nxdomain Error – Here’s what you need to know

Hey there! So, you’re encountering the dns_probe_finished_nxdomain error, huh? Don’t worry, I’ve got your back. Let’s dive into this issue and uncover the possible solutions together!

Okay, so here’s the deal. The dns_probe_finished_nxdomain error occurs when your computer can’t find the website you’re trying to access. It’s like you’re searching for a treasure, but you end up in a dead end. Frustrating, right?

Now, instead of throwing your hands up in defeat, let’s troubleshoot this error like a tech-savvy detective. Here are a few fixes you can try:

1. Check your internet connection: Make sure you’re properly connected to the internet. Double-check your Wi-Fi or Ethernet connection and see if any physical cable is loose or if your router needs a reset.

2. Clear your DNS cache: Your computer keeps a record of all the websites you visit. Sometimes, this cache gets a little messy, leading to errors like dns_probe_finished_nxdomain. Clearing your DNS cache can refresh the system and potentially fix the problem. Don’t worry, I’ll show you how:

– On Windows:

1. Press the Windows key and R at the same time to open the Run dialogue box.

2. Type “cmd” and hit Enter to open the Command Prompt.

3. In the Command Prompt, type “ipconfig /flushdns” and press Enter.

– On macOS:

1. Open the Terminal. You can find it by searching in Spotlight or by going to Applications -> Utilities -> Terminal.

2. In the Terminal window, type “sudo killall -HUP mDNSResponder” and press Enter. You may need to enter your password.

3. Change your DNS server: Your device relies on a DNS server to translate web addresses into IP addresses. Sometimes, the default DNS server can be the culprit behind the dns_probe_finished_nxdomain error. Luckily, you can change it! Here’s how:

– On Windows:

1. Press the Windows key and R at the same time to open the Run dialogue box.

2. Type “ncpa.cpl” and hit Enter to open the Network Connections window.

3. Right-click on your active network connection and select “Properties”.

4. Look for “Internet Protocol Version 4 (TCP/IPv4)” in the list and click on it.

5. Click on the “Properties” button.

6. Check the option “Use the following DNS server addresses” and enter these settings:

– Preferred DNS server: 8.8.8.8

– Alternate DNS server: 8.8.4.4

7. Click “OK” to save the changes.

– On macOS:

1. Go to the Apple menu and select “System Preferences”.

2. Click on “Network” and select your active network connection on the left.

3. Click on the “Advanced” button at the bottom.

4. Go to the “DNS” tab.

5. Click on the “+” button to add a new DNS server and enter the following settings:

– 8.8.8.8

– 8.8.4.4

6. Click “OK” to save the changes.

4. Restart your router: Sometimes, a simple restart can work wonders. Try turning off your router, waiting for a few seconds, and then turning it back on. This can help refresh your internet connection and resolve any temporary issues causing the dns_probe_finished_nxdomain error.

That’s it! These are some of the common fixes for the dns_probe_finished_nxdomain error. Give them a shot, and hopefully, one of these solutions will get you back on track to browsing the web smoothly.

Remember, technology can be a bit unpredictable, but with a little know-how and troubleshooting, you can conquer any error that comes your way. Good luck, and happy browsing!

If you’re using the Chrome browser, you might come across the annoying “dns_probe_finished_nxdomain” error. It doesn’t matter what operating system you’re using, I’ve got some solutions to help you fix it.

Let’s start with the easiest fixes at the top:

Restart Your Router

Your Internet provider’s router could be causing this DNS-related error. All you need to do is disconnect your Internet router for at least 3 minutes to let everything refresh. Then, reconnect and let the router restart. Once it’s up and running again, go back to your Google Chrome browser and see if the error is gone.

Clear the History in Chrome Browser

Follow these steps:

• In the upper right-hand corner of your Chrome browser, click on the three horizontal lines. Scroll down and click on “Settings.”
• Next, click on “History” on the left-hand side of your Chrome browser window. Then, click on the “Clear browsing data” button.
• In the Clear Browsing Data window, check all the boxes that apply. Finally, click on the “Clear browsing data” button to clear the history in your Chrome browser.

After clearing the history, go back to the website you were trying to access when you got the error message. See if that solves the “dns_probe_finished_nxdomain” error. If not, don’t worry! I have some more advanced solutions for you.

Flush the DNS Cache

Windows

Let’s fix that pesky error on Windows:

1. In Windows 10, hold down the “Windows” button and the “R” key on your keyboard.
2. The Run window will open. In the “Open:” text box, type “cmd” and click “OK.” This will open the command program for Windows 10.
3. In the command window, type “ipconfig /flushdns” and hit “Enter” on your keyboard.
4. You should see a message saying “Windows IP configuration successfully flushed the DNS resolver cache” in the cmd window.

Mac

• First, open the Terminal application.
• Type this command: “sudo dscacheutil -flushcache;sudo killall -HUP mDNSResponder; say cache flushed.”

Resetting Winsock

If your Winsock is corrupted, you can try resetting it. In Windows 8 and 10, follow these steps:

1. Press the “Windows” key and the “X” key on your keyboard.
2. In the menu that appears, select “Command Prompt (Admin).”
3. A command line window will open. Type “netsh winsock reset” and press “Enter.”
4. You’ll see the text, “Successfully reset the Winsock Catalog. You must restart the computer to complete the reset.”
5. Restart your computer and check if the problem is resolved.

Once your computer has restarted, hopefully the issue with the Chrome browser will be fixed.

Changing Your DNS Server Settings

For Windows Users

1. Again, hold down the “Windows” button and the “R” key on your keyboard. Then type “ncpa.cpl” and click “OK.”
2. Your network connections window will open. Here, we’re going to update the DNS settings.
3. Select the network adapter connected to the Internet. Right click on it and choose “Properties.”
4. Next, double-click on “Internet Protocol Version 4 (TCP/IPV4).” This opens the Internet protocol version 4 properties.

Hey there! Let’s make some changes to your internet settings. First, find the general panel and scroll down until you see the option that says “Use the following DNS server addresses.” It’s usually at the bottom of the open box. Click on it!

Now, you’re going to see two boxes where you can enter some numbers. In the first box, type in “8.8.8.8” as your Preferred DNS server. In the second box, enter “8.8.4.4” as your Alternate DNS server.

Once you’ve put in those numbers, don’t forget to click the “OK” button. That’s it! You’re all set. Your internet settings have been updated. Feel free to give it a try and see if everything is working smoothly. Have a great day!

Mac

To fix the “dns_probe_finished_nxdomain” error in Google Chrome on your Mac, follow these steps:

• First, open the “System Preferences” and click on “Network”.
• Next, locate and click on “Advanced” in the lower right-hand corner.
• Then, select “DNS” from the options in the upper middle bar.
• Click the plus sign to add a new DNS address.
• In the box labeled IPV4 and IPV6 addresses, enter the numbers 8.8.8.8 and 8.8.4.4.
• Finally, click the “OK” button to apply the changes.

That’s all the steps we have to fix the “dns_probe_finished_nxdomain” error in Chrome on a Mac. If you have any other solutions or suggestions, please let us know.